Crown permacote exterior emulsion with teflon surface protector

Excellent for exterior walls with stain protection and water resistance, providing long lasting colours for walls.

PRODUCT DESCRIPTION

Crown Permacote Exterior Emulsion with Teflon‚® is a Super Premium, pure acrylic based exterior decorative and protective paint incorporated with Teflon‚® additive which allows it to become even more scrubbable, stain resistant and easier to clean than any other exterior matt finish. Suitable for new and previously painted plaster, cement, brick, stone, softboard, hardboard, asbestos etc.

Characteristics: Manufactured from Pure Acrylic emulsion, combined with special Biocides to resist and greatly retard mould and algae and Teflon‚® additive to increase stain resistance and self-cleansing in the rains and to attract less dust contaminates.

Advantages: Washable, Easy wipe, Splash and Stain resistant. High covering power. Easy to apply-no special application or equipment needed. Rapid drying-two coats the same day. Can be applied on all types of surfaces subject to normal preparation. Waterborne system. Virtually odour free. Widest possible colour range. Long term protection. Reduced maintenance costs. Hides surface imperfections. Effective for filling hair line cracks.

Finish:? Matt.

Application:? By brush, roller or airless spray equipment.

Thinning:? Supplied ready for use. If required, first coat can be thinned with up to 15% clean water. Avoid over thinning as this will affect the opacity. Stir well before use.

Drying times:Touch Dry: 1-2hours. Re-coatable after 3-4 hours.

Equipment cleaner:? Water and household detergent.

Spreading Capacity:? See Table Below (m2/l)

Colour range:? Over 7,000 Colours including BS 4800 Crown House Colours plus any other shades from our Tinting system.

Pack sizes:? 1 litre, 4 litres and 20 litres.

Availability:? From Crown Depots in? Nairobi, Kisumu and Mombasa and through Crown Stockists.

SURFACE PREPARATION:

New Work:? Apply 3 coats Crown Permacote Exterior Emulsion with Teflon‚® with first coat thinned up to 15% with clean water.
Surfaces Previously Painted in Water-based Paint: Ensure the surface is clean and free of powdery or flaking material. If the surface is still suspect, apply 1 coat of Crown Penetrating Primer and allow to dry overnight. Then apply 2 coats Crown Permacote Exterior Emulsion with Teflon‚®.

Previously Gloss Painted Surfaces:? Ensure that the gloss finish is thoroughly rubbed down to provide a key. Apply 1 coat of Crown Undercoat followed by 2 coats Crown Permacote Exterior Emulsion with Teflon‚®.

Loosely bound & lime-washed, cement painted, distempered surfaces:? Remove all loose and flaking material down to a firm base, where necessary removing all previous coatings down to the original building fabric (refer Surface Preparation Data Sheet SP 1). Apply 1 coat Crown

Penetrating Primer:? Apply 2 coats Crown Permacote Exterior Emulsion with Teflon‚®

Notes:

1. When overcoating walls in sound condition with the same shade, the application of 1 coat may be sufficient.
2. When overcoating a dark colour with a light shade, the application of 3 coats may be necessary.
3. Choice of colours for technical reasons (often dependent upon pigment origin and type) an additional coat will often be required when using certain shades (particularly Bright Yellows, Greens, Oranges, Reds refer colour card for details). The use of these colours should be avoided on medium and low-cost projects. Where these low opacity colours are to be used on bare plaster, or for overcoating dark colours, the application of a first coat of a paler shade offering superior coverage is recommended. Consult Crown Technical Advisory Department for advice.
4. For chemical reasons, certain dark colours offer less resistance to fading when subjected to ultra violet light, especially in tropical climates. Consult Crown Technical Department for further details.